HEADING_CONTACT_US_POPUP_TITLE

HEADING_CONTACT_US_POPUP_SUBTITLE

UNASSEMBLED 650 CFM HP™ SERIES CARB KIT

Product Description

Part Number 49321

650 CFM HP Series

Metering Block Used in Kit: 3411978

Holley® Reference Number: 0-80541-1

Booster Used in Kit: 45312

NOTE: Pilot hole must be sized for proper use.

These kits contain all of the parts necessary to assemble a complete carburetor. Main jets and air bleeds NOT INCLUDED. All of the parts are packaged unassembled. The main bodies do not have the boosters installed and the base plates are not assembled. Kits can be customized, please contact one of our sales associates for details.

The kits are available to the professional carburetor builder only and are not available to the general public. BLP does not furnish any calibrations.

BLP PART NUMBERS INCLUDED IN 49321 KIT

102203Throttle Shaft, progressive linkage, 4150
102264-3Throttle Shaft, secondary linkage, 4150
1211195-2650-750 CFM HP bare base plate
1540Idle mixture screw (4)
16420Brass center hung float (2)
1741Float pivot pin (2)
18135.110 Viton needle and seat (2)
21572-31Pump discharge nozzle, .031 (2)
23258Pump discharge needle (2)
23468Pump nozzle check valve, rubber (2)
25591-65Gas power valve, 6.5 (2)
27152Idle mixture screw seal, cork (4)
291094Secondary return spring pin
34113354150 Secondary fuel bowl
3411341-14150 Primary Fuel Bowl
3411978650 CFM HP™ series metering block (2)
342183Pump diaphragm cover, 30cc (2)
35342Pump diaphragm, 30cc (2)
37133Accelerator pump arm pivot (2)
38110Throttle adjusting spring, 4150
381216Return spring for center pivot floats (2)
381762Secondary throttle return spring, 4150
38569Pump diaphragm spring, 30cc, (heavy) (2)
39160Needle and seat adjusting nut (2)
41330Accelerator pump cam, pink
43601Progressive secondary throttle link, 4150
45312Straight leg booster with .125 hole (4)
46395Secondary throttle link washer
4744Pump arm retainer clip (2)
4794Reusable bowl screw gasket, nylon (8)
48183Secondary throttle link cotter pin
4858-1.400Vent tube, 1.400 (2)
51016Float bracket screw (4)
51271Throttle adjusting screw, 4150
5159Vent whistle rivet (2)
51601Secondary throttle adjustment screw, 4150
5313Accelerator pump passage plug for billet metering block (2)
5369Pump housing screw, 30cc (8)
5400RBowl gasket, red (2)
5401RMetering block gasket, red (2)
5500-00Press in air corrector, blank (8)
5552Standard float bowl screw with hex head (8)
5567Base plate to main body screw (8)
5584Secondary pump cam bracket screw
56352 Stainless steel button head throttle plate screw, Torx design, 3/16” (8)
5682Pump cam screw
5765Needle and seat adjusting nut lock screw (2)
5854Pump discharge screw, solid (2)
59171Vent whistle for float bowl (2)
5979Float bracket (2)
637414150 Pump arm assembly, steel, 30cc (2)
63822Secondary accelerator pump cam bracket
67887-2650 CFM HP™ bare main body, 0-80541-1
7107Brass plug for .250 main and idle well (8)
7225Float bowl sight screw (2)
81031650-750 Base to main body gasket
81185Fuel bowl inlet fitting gasket, 7/8" thread (2)
81597Power valve gasket (2)
8540Float bowl sight screw gasket (2)
8776Needle and seat adjusting nut gasket (2)
8777Needle and seat adjusting nut lock screw gasket (2)
8844Pump nozzle screw gasket (4)
9354650-830 CFM, Stainless Steel, 1.688 Diameter, No Hole, #354 (4)

Features

  • Model: 49321
  • Shipping Weight: 12.5lbs
  • Manufactured by: BLP

Reviews

Be the first to write a review. Write a Review

This product was added to our catalog on Monday 17 May, 2010.