HEADING_CONTACT_US_POPUP_TITLE

HEADING_CONTACT_US_POPUP_SUBTITLE

1050HP DOMINATOR SERIES BUILDER KIT

1050HP DOMINATOR SERIES BUILDER KIT

Price:

$795.95

Qty:

Product Description

UNASSEMBLED 4500 HP DOMINATOR SERIES CARBURETOR KITS

1050 CFM HP Series

Metering Block Used in Kit: 3411961-3

Holley® Reference Number: 0-8896

Booster Used in Kit: 45291

These kits contain all of the parts necessary to assemble a complete carburetor. Main jets and air bleeds NOT INCLUDED. All of the parts are packaged unassembled. The main bodies do not have the boosters installed and the base plates are not assembled. Kits can be customized, please contact one of our sales associates for details.

The kits are available to the professional carburetor builder only and are not available to the general public. BLP does not furnish any calibrations.

BLP PART NUMBERS INCLUDED IN 49301 KIT

49352-2.000Throttle Shaft, External linkage application,4500 (2)
111413Throttle lever, secondary, 4500
112002Throttle lever, fast progressive ratio, 4500
112583Throttle lever, intermediate, 4500
1211259-41050 CFM HP bare base plate, 0-9375
131469Threaded guide bushing, 4500
141291Booster stake tube, .160 (4)
141293Idle tube, straight, 4500 (4)
14797Intermediate discharge tube, .850 long, 4500 (4)
1540Idle mixture screw (4)
16420Brass center hung float (2)
1741Float pivot pin (2)
18135.110 Viton needle and seat (2)
21572-35Pump discharge nozzle, .035 (2)
21890Booster banjo only, 4500 (4)
23258Pump discharge needle (2)
23468Pump nozzle check valve, rubber (2)
27152Idle mixture screw seal, cork (4)
33538Secondary throttle link, 4500
3411343-14500 Primary fuel bowl
3411347-14500 Secondary fuel bowl
3411961-31150 CFM HP series metering block, 3 circuit (2)
342774Pump diaphragm cover, 50cc (2)
351074Pump diaphragm, 50cc (2)
37133Accelerator pump arm pivot (2)
381216Return spring for center pivot floats (2)
381490Pump diaphragm spring, 50cc (2)
381500Throttle return torsion spring, 4500 (2)
381559Throttle adjustment spring, 4500 (2)
39160Needle and seat adjusting nut (2)
41643Accelerator pump cam, yellow (2)
43151GAluminum fuel bowl plug, grey (2)
45291Booster insert only, 8 hole, 4500 (4)
4611Throttle link flat washer, 4500
46268 Throttle link lock washer, 4500
4744Pump arm retainer clip (2)
4794Reusable bowl screw gasket, nylon (8)
48183Secondary throttle link cotter pin (3)
4858-1.400Vent tube, 1.400 (2)
51016Float bracket screw (4)
51244Pump nozzle screw, hollow (2)
51258Linkage retainer screw, 4550 (2)
51260Throttle plate screw, 4550
5159Vent whistle rivet (2)
52043Linkage pivot screw, 4500
5313Accelerator pump passage plug for billet metering block (2)
5370Pump housing screw, 50cc (8)
5372Primary idle adjustment screw, 4500 (2)
5400RBowl gasket, red (2)
5401RMetering block gasket, red (2)
55461-026Idle fuel for 4500 HP carburetors, 026 stock, .110 OD (4)
5552Standard float bowl screw with hex head (8)
5682Pump cam screw (2)
5765Needle and seat adjusting nut lock screw (2)
59171Vent whistle for float bowl (2)
5979Float bracket (2)
63853Pump arm assembly, 50cc, 4500 (2)
7122Lead ball, .140, 3 circuit, 4500 (16)
7225Float bowl sight screw (2)
738Dominator throttle shaft end plugs, 4500 (2)
7557Brass plug, .180(4)
81185Fuel bowl inlet fitting gasket, 7/8" thread (4)
8540Float bowl sight screw gasket (2)
8776Needle and seat adjusting nut gasket (2)
8777Needle and seat adjusting nut lock screw gasket (2)
8844Pump nozzle screw gasket (4)
92284500 Oversize throttle plate, 2.000 diameter, #228 (4)



BLP Racing Products, LLC. Is not responsible for errors with photography, typographical content or pricing and are subject to correction and/or change without notice.

Features

  • Model: 49301
  • Shipping Weight: 9lbs
  • Manufactured by: BLP

Reviews

Be the first to write a review. Write a Review

This product was added to our catalog on Tuesday 18 May, 2010.